cert. server problem 
Author Message
 cert. server problem

Hi all,
I just installed my netscape certificate server and use the old
installed informix server.
When I want to start the certificate server, it said that
------------------------------------------------------------------------------------

[13/Jun/2000:14:32:45] INFO        Logging started at log level 'info'
[13/Jun/2000:14:32:45] INFO        Certificate Server initializing.
[13/Jun/2000:14:32:47] INFO        Certificate extensions are enabled
[13/Jun/2000:14:32:50] FAILURE     [VENDORLIB] Vendor Library Error:
Transaction
 not available.(-256)
[13/Jun/2000:14:32:50] FAILURE     [VENDORLIB] Vendor Library Error:
Transaction
 not available.(-256)
[13/Jun/2000:14:32:50] CATASTROPHE Transactions are not supported by the
databas
e cmsdb on server ifmx_online
[13/Jun/2000:14:32:50] CATASTROPHE Failed to open DB connection using:
type=INFO
RMIX, server=ifmx_online, user=cmsdbuser , db=cmsdb
-------------------------------------------------------------------------------------

the informix server's setting is attached. thank you very much.

chan wan
www.cfb.com.hk

[ conf.txt 7K ]
#**************************************************************************
#
#                          INFORMIX SOFTWARE, INC.
#
#  Title:       onconfig.std
#  Description: INFORMIX-OnLine Configuration Parameters
#
#**************************************************************************

# Root Dbspace Configuration

ROOTNAME        rootdbs         # Root dbspace name
ROOTPATH        /usr/informix/dbspace/rootdbs
                                # Path for device containing root dbspace
ROOTOFFSET      0               # Offset of root dbspace into device (Kbytes)
ROOTSIZE        20000           # Size of root dbspace (Kbytes)

# Disk Mirroring Configuration Parameters

MIRROR          0               # Mirroring flag (Yes = 1, No = 0)
MIRRORPATH                      # Path for device containing mirrored root
MIRROROFFSET    0               # Offset into mirrored device (Kbytes)

# Physical Log Configuration

PHYSDBS         rootdbs         # Location (dbspace) of physical log
PHYSFILE        1000            # Physical log file size (Kbytes)

# Logical Log Configuration

LOGFILES        6               # Number of logical log files
LOGSIZE         500             # Logical log size (Kbytes)

# Diagnostics

MSGPATH         /usr/informix/online.log # System message log file path
CONSOLE         /dev/null       # System null message path
ALARMPROGRAM                    # Alarm program path

# System Archive Tape Device

TAPEDEV         /dev/null       # Tape device path      
TAPEBLK         16              # Tape block size (Kbytes)
TAPESIZE        2048000         # Maximum amount of data to put on tape (Kbytes)

# Log Archive Tape Device

LTAPEDEV        /dev/rmt/0m     # Log tape device path
LTAPEBLK        16              # Log tape block size (Kbytes)
LTAPESIZE       2048000         # Max amount of data to put on log tape (Kbytes)

# Optical

STAGEBLOB                       # INFORMIX-OnLine/Optical staging area

# System Configuration

SERVERNUM       14              # Unique id corresponding to a OnLine instance
DBSERVERNAME    ifmx_online     # Name of default database server
DBSERVERALIASES                 # List of alternate dbservernames
DEADLOCK_TIMEOUT 60              # Max time to wait of lock in distributed env.
RESIDENT        0               # Forced residency flag (Yes = 1, No = 0)

MULTIPROCESSOR  0               # 0 for single-processor, 1 for multi-processor
NUMCPUVPS       1               # Number of user (cpu) vps
SINGLE_CPU_VP   1               # If non-zero, limit number of cpu vps to one

NOAGE           0               # Process aging
AFF_SPROC       0               # Affinity start processor
AFF_NPROCS      0               # Affinity number of processors

# Shared Memory Parameters

LOCKS           2000            # Maximum number of locks
BUFFERS         5000            # Maximum number of shared buffers
NUMAIOVPS                       # Number of IO vps
PHYSBUFF        32              # Physical log buffer size (Kbytes)
LOGBUFF         32              # Logical log buffer size (Kbytes)
LOGSMAX         6               # Maximum number of logical log files
CLEANERS        1               # Number of buffer cleaner processes
SHMBASE         0xa000000         # Shared memory base address
SHMVIRTSIZE     8000            # initial virtual shared memory segment size
SHMADD          8192            # Size of new shared memory segments (Kbytes)
SHMTOTAL        0               # Total shared memory (Kbytes). 0=>unlimited
CKPTINTVL       300             # Check point interval (in sec)
LRUS            8               # Number of LRU queues
LRU_MAX_DIRTY   60              # LRU percent dirty begin cleaning limit
LRU_MIN_DIRTY   50              # LRU percent dirty end cleaning limit
LTXHWM          50              # Long transaction high water mark percentage
LTXEHWM         60              # Long transaction high water mark (exclusive)
TXTIMEOUT       0x12c             # Transaction timeout (in sec)
STACKSIZE       32              # Stack size (Kbytes)

# System Page Size
# BUFFSIZE - OnLine no longer supports this configuration parameter.
#            To determine the page size used by OnLine on your platform
#            see the last line of output from the command, 'onstat -b'.

# Recovery Variables
# OFF_RECVRY_THREADS:
# Number of parallel worker threads during fast recovery or an offline restore.
# ON_RECVRY_THREADS:
# Number of parallel worker threads during an online restore.

OFF_RECVRY_THREADS 10              # Default number of offline worker threads
ON_RECVRY_THREADS 1               # Default number of online worker threads

# Data Replication Variables
# DRAUTO: 0 manual, 1 retain type, 2 reverse type
DRAUTO          0               # DR automatic switchover
DRINTERVAL      30              # DR max time between DR buffer flushes (in sec)
DRTIMEOUT       30              # DR network timeout (in sec)
DRLOSTFOUND     /tmp            # DR lost+found file path

# Read Ahead Variables
RA_PAGES        200             # Number of pages to attempt to read ahead
RA_THRESHOLD    100             # Number of pages left before next group

# DBSPACETEMP:
# OnLine equivalent of DBTEMP for SE. This is the list of dbspaces
# that the OnLine SQL Engine will use to create temp tables etc.
# If specified it must be a colon separated list of dbspaces that exist
# when the OnLine system is brought online.  If not specified, or if
# all dbspaces specified are invalid, various ad hoc queries will create
# temporary files in /tmp instead.

DBSPACETEMP                     # Default temp dbspaces

# DUMP*:
# The following parameters control the type of diagnostics information which
# is preserved when an unanticipated error condition (assertion failure) occurs
# during OnLine operations.  
# For DUMPSHMEM, DUMPGCORE and DUMPCORE 1 means Yes, 0 means No.

DUMPDIR         /tmp            # Preserve diagnostics in this directory
DUMPSHMEM       1               # Dump a copy of shared memory
DUMPGCORE       0               # Dump a core image using 'gcore'
DUMPCORE        0               # Dump a core image (Warning:this aborts OnLine)
DUMPCNT         1               # Number of shared memory or gcore dumps for
                                # a single user's session

# ADT*
# The following parameters control the type and level of secure auditing
# present in the OnLine system. By default, ADTMODE is 0 and auditing
# is disabled

FILLFACTOR      90              # Fill factor for building indexes

# method for OnLine to use when determining current time
USEOSTIME       0               # 0: use internal time(fast), 1: get time from OS(slow)

# Parallel Database Queries (pdq)
PDQPRIORITY     0               # Degree of parallelism: 0 ... 100,
                       #                        OFF => 0, LOW => 1, HIGH => 100
MAX_PDQPRIORITY 100             # Maximum allowed pdqpriority
DS_MAX_QUERIES                  # Maximum number of decision support queries
DS_TOTAL_MEMORY                 # Decision support memory (Kbytes)
DS_MAX_SCANS    1048576         # Maximum number of decision support scans      
DATASKIP        off             # List of dbspaces to skip

# OPTCOMPIND
# 0 => Nested loop joins will be preferred (where
#      possible) over sortmerge joins and hash joins.
# 1 => If the transaction isolation mode is not  
#      "repeatable read", optimizer behaves as in (2)
#      below.  Otherwise it behaves as in (0) above.
# 2 => Use costs regardless of the transaction isolation
#      mode.  Nested loop joins are not necessarily  
#      preferred.  Optimizer bases its decision purely  
#      on costs.
OPTCOMPIND      1               # To hint the optimizer

ONDBSPACEDOWN   0               # Dbspace down option: 0 = CONTINUE, 1 = ABORT, 2 = WAIT
LBU_PRESERVE    0               # Preserve last log for log backup
OPCACHEMAX      0               # Maximum optical cache size (Kbytes)



Wed, 18 Jun 1902 08:00:00 GMT
 
 [ 1 post ] 

 Relevant Pages 

1. SQL Server Mag Cert test voucher

2. Delphi Client/Server Cert Exam

3. JSSE : untrusted server cert chain

4. GET YOUR MS SQL CERT FREE ONLINE

5. SQL cert question

6. CERT Advisory CA-2002-22

7. Get Your MS SQL CERT For Free Online

8. MCDBA Cert?

9. 2 sql cert 70-028 questions.

10. Help needed MCDBA cert

11. Get Your MS SQL CERT for Free Online

12. Get Your MS SQL Cert FREE Online


 
Powered by phpBB® Forum Software